Add bulk clear-params action that re-extracts from retained logs (ticket 052)

DELETE /api/params clears the entire standalone-param set — manual and
auto-derived alike — then immediately re-runs auto_declare_params against
every IndexKey::IngestedLog entry still held in the engine's index (oldest
to newest), so params come back fresh from currently-retained log text
without requiring new lines to be ingested. This is a deliberate full
reset, unlike reload_engine_declarations's profile-switch cleanup, which
preserves auto-derived params since those are engine-discovered facts
rather than profile state; here the immediate re-extraction step makes
clearing them safe.

Settings::clear_param_declarations empties the active profile's persisted
params so they don't reappear on restart. The webapp's Params section gets
a single "Clear all" button (with a confirm dialog and a status line
reporting removed/re-derived/logs_considered) rather than a per-param
delete loop; logs_considered surfaces that lines already evicted by
max_logs can't regain their params.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XFUNZwCvz3kcod3352ZR2o

src/api.rs

@@ -55,6 +55,23 @@ impl ApiState {
         }
     }
 
+    /// Counterpart to `persist_param_declaration` for `DELETE /api/params` (ticket 052): empties the
+    /// active profile's stored params so the just-cleared set doesn't reappear from `settings.json`
+    /// on next load. Same best-effort semantics — a no-op if no profile is active, I/O failures only
+    /// logged, since the engine-side clear (already applied by the time this runs) is the source of
+    /// truth for the running process.
+    fn persist_clear_params(&self) {
+        let mut settings = self.settings.lock().unwrap();
+        let Some(profile_name) = settings.active_profile.clone() else {
+            return;
+        };
+        if let Err(err) = settings.clear_param_declarations(&self.settings_path, &profile_name) {
+            eprintln!(
+                "warning: failed to clear persisted param declarations for profile '{profile_name}': {err}"
+            );
+        }
+    }
+
     /// Same as `persist_param_declaration`, for metric declarations. Also promotes any of the
     /// metric's referenced params that only exist as auto-derived engine state (see
     /// `promoted_param_records`) into persisted profile params, so a metric built against an
@@ -128,7 +145,7 @@ pub fn router(engine: EngineHandle, settings: SettingsHandle, settings_path: Pat
         .route("/api/logs", get(get_logs))
         .route("/api/timeline", get(get_timeline))
         .route("/api/stats", get(get_stats))
-        .route("/api/params", get(list_params).post(declare_param))
+        .route("/api/params", get(list_params).post(declare_param).delete(clear_params))
         .route("/api/metrics", get(list_metrics).post(declare_metric))
         .route(
             "/api/metrics/{name}",
@@ -321,6 +338,25 @@ async fn declare_param(
     }
 }
 
+/// `DELETE /api/params` (ticket 052): clears every declared param (manual and auto-derived) and
+/// immediately re-derives whatever `auto_declare_params` can still find in log text the engine
+/// still retains. The response body's `logs_considered` tells the caller how many retained lines
+/// were re-scanned, so the UI can make clear that lines evicted by `max_logs` before this ran
+/// can't regain their params — this is expected behavior, not a partial failure.
+async fn clear_params(State(state): State<ApiState>) -> impl IntoResponse {
+    let (respond_to, response) = oneshot::channel();
+    if state.engine.send(EngineMessage::ClearParams { respond_to }).await.is_err() {
+        return StatusCode::SERVICE_UNAVAILABLE.into_response();
+    }
+    match response.await {
+        Ok(result) => {
+            state.persist_clear_params();
+            Json(result).into_response()
+        }
+        Err(_) => StatusCode::SERVICE_UNAVAILABLE.into_response(),
+    }
+}
+
 async fn list_metrics(State(state): State<ApiState>) -> impl IntoResponse {
     match ask(&state.engine, EngineQuery::MetricDeclarations).await {
         Ok(EngineResponse::MetricDeclarations(declarations)) => Json(declarations).into_response(),
@@ -937,6 +973,51 @@ mod tests {
         assert_eq!(body["capture_group"], "level");
     }
 
+    /// Ticket 052's core acceptance criteria: `DELETE /api/params` removes every declared param
+    /// (manual and auto-derived), that removal survives a reload of persisted settings, and —
+    /// without any new line being ingested — the retained `IngestedLog` entries immediately
+    /// re-derive a fresh (auto-derived) param set.
+    #[tokio::test]
+    async fn clearing_params_persists_and_reextracts_from_retained_logs() {
+        let (app, engine, settings_handle, dir) = test_app();
+
+        let settings_path = dir.path().join("settings.json");
+        {
+            let mut settings = settings_handle.lock().unwrap();
+            settings.create_profile(&settings_path, "web".to_string()).unwrap();
+            settings.set_active_profile(&settings_path, Some("web".to_string())).unwrap();
+        }
+
+        // A manual declaration plus an auto-derived one (from ingesting a logfmt line before "path" is declared).
+        declare_test_param(&app, "path", r"request path=(?P<path>\S+)", "path", "string").await;
+        ingest_lines(&engine, 0, &["request path=/a", "level=info x=1"]).await;
+
+        let (_, before) = get_json(&app, "/api/params").await;
+        let before_names: Vec<&str> =
+            before.as_array().unwrap().iter().map(|p| p["name"].as_str().unwrap()).collect();
+        assert!(before_names.contains(&"path"));
+        assert!(before_names.contains(&"level"));
+        assert!(before_names.contains(&"x"));
+
+        let (status, result) = send_json(&app, "DELETE", "/api/params", json!({})).await;
+        assert_eq!(status, StatusCode::OK);
+        assert_eq!(result["removed"], before_names.len() as u64);
+        // Re-derived without any new ingest — same three keys come back, now all auto-derived.
+        assert_eq!(result["reextracted"], 3);
+        assert_eq!(result["logs_considered"], 2);
+
+        let (_, after) = get_json(&app, "/api/params").await;
+        let after_params = after.as_array().unwrap();
+        assert_eq!(after_params.len(), 3);
+        assert!(after_params.iter().all(|p| p["auto_derived"] == true));
+
+        // The clear persisted: "path" (the only manually-declared, profile-stored param) doesn't
+        // reappear from settings.json on a fresh load.
+        let reloaded_settings = Settings::load(&settings_path);
+        let profile = reloaded_settings.profile("web").unwrap();
+        assert!(profile.params.is_empty());
+    }
+
     #[tokio::test]
     async fn rejects_invalid_param_regex_with_400_and_error_body() {
         let (app, _engine, _settings, _dir) = test_app();

src/engine.rs

@@ -36,6 +36,19 @@ pub struct MetricSample {
 /// Also the request body for `POST /api/params` — `Deserialize` is derived directly here rather than adding a separate DTO, since the shape already matches `ParamDeclaration`.
 pub type DeclareParamRequest = ParamDeclaration;
 
+/// Response to `EngineMessage::ClearParams` (ticket 052) — also the JSON body for `DELETE /api/params`.
+#[derive(Debug, Clone, serde::Serialize)]
+pub struct ClearParamsResult {
+    /// How many param declarations (manual + auto-derived) were removed.
+    pub removed: usize,
+    /// How many params `auto_declare_params` re-derived immediately afterward from retained log text.
+    pub reextracted: usize,
+    /// How many `IndexKey::IngestedLog` entries were still retained (not yet evicted by `max_logs`)
+    /// and so were re-scanned — surfaced so a caller can tell the user re-extraction only covers
+    /// logs still held in memory, not lines evicted before the clear.
+    pub logs_considered: usize,
+}
+
 /// A metric references its params by name (resolved against the engine's standalone
 /// `ParamDeclaration` store in `apply_metric_to_log`) rather than embedding its own
 /// regex/capture-group/kind per param — see ticket 037. Also the request body for
@@ -90,6 +103,16 @@ pub enum EngineMessage {
         name: String,
         respond_to: oneshot::Sender<bool>,
     },
+    /// Ticket 052: wipes the entire standalone-param set (manual *and* auto-derived — unlike
+    /// `reload_engine_declarations`'s profile-switch cleanup, this is an explicit user-driven reset,
+    /// not a "keep engine-discovered facts across profiles" cleanup), then immediately re-runs
+    /// `auto_declare_params` over every `IndexKey::IngestedLog` entry still retained in the index,
+    /// oldest to newest, so declaration-order semantics match a fresh ingest. Lines already evicted
+    /// by `max_logs` can't regain their params — `ClearParamsResult::logs_considered` reports how
+    /// many retained lines were re-scanned, so a caller can surface that bound to the user.
+    ClearParams {
+        respond_to: oneshot::Sender<ClearParamsResult>,
+    },
     DeclareMetric {
         request: DeclareMetricRequest,
         respond_to: oneshot::Sender<Result<(), String>>,
@@ -195,6 +218,11 @@ pub async fn run(mut rx: mpsc::Receiver<EngineMessage>, settings: SettingsHandle
                 let existed = index.remove(&IndexKey::ParamDeclaration { name }).is_some();
                 let _ = respond_to.send(existed);
             }
+            EngineMessage::ClearParams { respond_to } => {
+                let removed = clear_all_param_declarations(&mut index);
+                let (reextracted, logs_considered) = reextract_params_from_retained_logs(&mut index);
+                let _ = respond_to.send(ClearParamsResult { removed, reextracted, logs_considered });
+            }
             EngineMessage::DeclareMetric { request, respond_to } => {
                 let result = declare_metric(&mut index, request);
                 let _ = respond_to.send(result);
@@ -326,6 +354,42 @@ fn auto_declare_params(index: &mut BTreeMap<IndexKey, DataValue>, text: &str) {
     }
 }
 
+/// Ticket 052: removes every `IndexKey::ParamDeclaration` entry — manual and auto-derived alike.
+/// Returns how many were removed. Unlike `RemoveParamDeclaration`'s single-name removal (used by
+/// `reload_engine_declarations` during a profile switch, which deliberately keeps auto-derived
+/// params since they're engine-discovered facts rather than profile state), this is a full reset:
+/// the caller (`EngineMessage::ClearParams`) immediately re-runs `auto_declare_params` afterward, so
+/// wiping the auto-derived ones too just means they come back fresh instead of stale.
+fn clear_all_param_declarations(index: &mut BTreeMap<IndexKey, DataValue>) -> usize {
+    let names: Vec<String> =
+        param_declarations_range(index).map(|(name, ..)| name.to_string()).collect();
+    let removed = names.len();
+    for name in names {
+        index.remove(&IndexKey::ParamDeclaration { name });
+    }
+    removed
+}
+
+/// Ticket 052: re-runs `auto_declare_params` against every `IndexKey::IngestedLog` entry still held
+/// in the index, oldest to newest (matching normal ingest order, so declaration-order semantics —
+/// e.g. which key "wins" a naming collision — come out the same as if the lines were freshly
+/// ingested). Only ever called right after `clear_all_param_declarations`, so every param produced
+/// here is fresh, not a re-declaration.
+///
+/// Returns `(reextracted, logs_considered)`: how many params came back, and how many retained log
+/// lines were re-scanned. Lines already dropped by `evict_excess_logs` before this ran aren't in the
+/// index anymore and so can't contribute — `logs_considered` is how the caller surfaces that bound
+/// to the user, rather than the re-extraction silently looking complete when it isn't.
+fn reextract_params_from_retained_logs(index: &mut BTreeMap<IndexKey, DataValue>) -> (usize, usize) {
+    let texts: Vec<String> = logs_range(index).map(|(_, _, text)| text.to_string()).collect();
+    let logs_considered = texts.len();
+    for text in &texts {
+        auto_declare_params(index, text);
+    }
+    let reextracted = param_declarations_range(index).count();
+    (reextracted, logs_considered)
+}
+
 /// Validates the metric's own regex plus that every name in `label_params`/`value_param` refers to
 /// an already-declared standalone param (not just the first bad one, so a rejection reports every
 /// problem at once). Shared by `declare_metric` and `update_metric` so both reject a bad
@@ -1928,6 +1992,73 @@ mod tests {
         assert_eq!(approx_bytes_total, 3);
     }
 
+    fn insert_ingested_log(index: &mut BTreeMap<IndexKey, DataValue>, sequence: u64, text: &str) {
+        index.insert(
+            IndexKey::IngestedLog { sequence, timestamp: Timestamp::from_millis(sequence as i64) },
+            DataValue::LogLiteral { text: text.to_string() },
+        );
+    }
+
+    #[test]
+    fn clear_all_param_declarations_removes_manual_and_auto_derived() {
+        let mut index = BTreeMap::new();
+        auto_declare_params(&mut index, "x1=-4");
+        declare_param(&mut index, request("level", r"level=(?P<level>\w+)", "level")).unwrap();
+        assert_eq!(param_declarations_range(&index).count(), 2);
+
+        let removed = clear_all_param_declarations(&mut index);
+
+        assert_eq!(removed, 2);
+        assert_eq!(param_declarations_range(&index).count(), 0);
+    }
+
+    #[test]
+    fn reextract_params_from_retained_logs_rebuilds_from_ingested_text_without_new_ingest() {
+        let mut index = BTreeMap::new();
+        insert_ingested_log(&mut index, 0, r#"level=info msg="started""#);
+        insert_ingested_log(&mut index, 1, "x1=-4 y1=34");
+        auto_declare_params(&mut index, r#"level=info msg="started""#);
+        auto_declare_params(&mut index, "x1=-4 y1=34");
+        assert_eq!(param_declarations_range(&index).count(), 4);
+
+        clear_all_param_declarations(&mut index);
+        assert_eq!(param_declarations_range(&index).count(), 0);
+
+        // No new lines ingested — re-extraction works purely off the `IngestedLog` entries already
+        // retained in the index (ticket 052's core acceptance criterion).
+        let (reextracted, logs_considered) = reextract_params_from_retained_logs(&mut index);
+
+        assert_eq!(logs_considered, 2);
+        assert_eq!(reextracted, 4);
+        let declarations: HashMap<&str, _> =
+            param_declarations_range(&index).map(|d| (d.0, d)).collect();
+        assert!(declarations.contains_key("level"));
+        assert!(declarations.contains_key("msg"));
+        assert!(declarations.contains_key("x1"));
+        assert!(declarations.contains_key("y1"));
+        assert!(declarations.values().all(|d| d.6), "re-extracted params must be flagged auto_derived");
+    }
+
+    #[test]
+    fn reextract_params_from_retained_logs_only_covers_lines_still_in_the_index() {
+        // Simulates a line evicted (by `max_logs`) before the clear+re-extract runs: its key/value
+        // pair is simply gone from the index, same as `evict_excess_logs` leaves things, so
+        // `auto_declare_params` never sees it again.
+        let mut index = BTreeMap::new();
+        insert_ingested_log(&mut index, 1, "x1=-4");
+        auto_declare_params(&mut index, "evicted_only_key=1");
+        auto_declare_params(&mut index, "x1=-4");
+        assert_eq!(param_declarations_range(&index).count(), 2);
+
+        clear_all_param_declarations(&mut index);
+        let (reextracted, logs_considered) = reextract_params_from_retained_logs(&mut index);
+
+        assert_eq!(logs_considered, 1, "only the retained log line should be re-scanned");
+        assert_eq!(reextracted, 1, "the evicted line's key can't come back");
+        let declarations: Vec<_> = param_declarations_range(&index).collect();
+        assert_eq!(declarations[0].0, "x1");
+    }
+
     #[test]
     fn declarations_stay_within_their_range() {
         let mut index = BTreeMap::new();

src/profile.rs

@@ -600,6 +600,26 @@ impl Settings {
         Ok(())
     }
 
+    /// Empties `profile_name`'s stored param declarations, persisting settings — the counterpart to
+    /// `record_param_declaration` for `DELETE /api/params` (ticket 052). A profile only ever stores
+    /// manually-declared params (auto-derived ones live only in the engine, never persisted here), so
+    /// this is enough to keep the whole set from reappearing on next load; the engine-side clear
+    /// re-derives whatever auto params the retained log text still supports.
+    pub fn clear_param_declarations(
+        &mut self,
+        settings_path: &Path,
+        profile_name: &str,
+    ) -> Result<(), ProfileError> {
+        let profile = self
+            .profiles
+            .iter_mut()
+            .find(|p| p.name == profile_name)
+            .ok_or(ProfileError::NotFound)?;
+        profile.params.clear();
+        self.save(settings_path)?;
+        Ok(())
+    }
+
     /// Records/updates a declared param into `profile_name`'s stored declarations (matched by param
     /// name), persisting settings. Intended to be called by the HTTP API alongside declaring against
     /// the engine, so declarations survive a restart.

tickets/052-clear-params-and-reextract.md

@@ -1,79 +0,0 @@
-# 052 — Allow clearing all params, then re-extract them from already-ingested logs
-
-## Summary
-
-There is no bulk "clear params" action. The engine already supports
-removing a single param declaration internally —
-`EngineMessage::RemoveParamDeclaration { name, respond_to }`
-(`src/engine.rs:85-92`), handled at `src/engine.rs:190-197` by removing
-the `IndexKey::ParamDeclaration` entry — but it is only ever invoked from
-`reload_engine_declarations` (`src/api.rs:664-682`), a profile-switch
-cleanup path that filters out auto-derived params (comment at
-`src/api.rs:665-668`) and removes the rest one at a time. There is no
-route exposing this to the user, no persistence-side removal method
-(`src/profile.rs` has `record_param_declaration` at `profile.rs:606` but
-nothing to un-record it), and no webapp affordance
-(`webapp/src/lib/api.ts:283-287` only exposes `getParams`/`declareParam`).
-
-The harder half of this request — "logs get re-iterated to extract
-params from them" — is not just a rewording of `auto_declare_params`.
-That function runs once, at ingest time, against each incoming line
-(`src/engine.rs:154`, `auto_declare_params` defined at
-`src/engine.rs:307-325`, backed by `extract_pairs` in `src/logfmt.rs`) and
-is never replayed. Re-extraction after a clear means running that same
-logic again, after the fact, against lines already sitting in the index.
-This is structurally possible: raw ingested text is retained as
-`IndexKey::IngestedLog { sequence, timestamp } -> DataValue::LogLiteral`
-in the same `BTreeMap` (`src/engine.rs:148-152`), occupying the index
-range between `IndexKey::Start` and `IndexKey::LogParamSplit`
-(iterated at `src/engine.rs:1166`, `1181`) — but only for lines that
-haven't already been evicted by `max_logs`/`evict_excess_logs`
-(`src/engine.rs:151-156`). Lines evicted before a clear+re-extract cannot
-regain their params; this bound should be surfaced to the user, not
-silently ignored.
-
-Note `main.rs:75-96`'s `profile::load_into_engine` replay path is not
-directly reusable here — it replays *declarations* into a fresh engine
-before ingest starts, whereas this feature must re-run *extraction*
-against logs the engine already holds.
-
-## Scope
-
-- Add a bulk "clear params" `EngineMessage` (or reuse
-  `RemoveParamDeclaration` in a loop, mirroring
-  `reload_engine_declarations`'s existing pattern at
-  `src/api.rs:664-682`) that removes all declared params — deciding
-  whether auto-derived and manually-declared params are both cleared or
-  only one category, and stating that choice in the PR (the existing
-  `reload_engine_declarations` precedent excludes auto-derived ones for a
-  reason worth re-reading before copying it here).
-- Add a persisted-removal counterpart in `src/profile.rs`/`src/settings.rs`
-  so cleared params don't reappear from `settings.json` on next load.
-- After clearing, re-run `auto_declare_params` against every retained
-  `IndexKey::IngestedLog` entry still in the index (oldest to newest, to
-  preserve declaration-order semantics), producing a fresh param set from
-  currently-available log text.
-- Expose this as a single user-facing action (`DELETE /api/params` or
-  similar in `src/api.rs`, plus a button in whatever webapp component
-  hosts the params list) — not a per-param loop the user has to drive
-  from the UI.
-- Surface to the user (via response body or UI copy) that re-extraction
-  only covers logs still retained in memory, not lines already evicted by
-  `max_logs`.
-
-## Acceptance criteria
-
-- Triggering "clear params" removes all param declarations from
-  `GET /api/params` and they do not reappear after a restart.
-- Immediately after clearing, params re-appear derived from the log text
-  still held in the engine's index, without requiring new lines to be
-  ingested, verified with a seeded fixture where params are cleared and
-  re-extracted from a fixed set of already-ingested lines.
-- If some lines have been evicted before the clear, the re-extracted
-  param set reflects only the retained subset, and this is not reported
-  as an error.
-
-## Depends on
-
-None (touches the same `RemoveParamDeclaration`/`reload_engine_declarations`
-seam used by profile switching).

webapp/src/components/Params.tsx

@@ -1,5 +1,5 @@
 import { useMemo, useState } from 'react'
-import { ApiError, declareParam, type ParamDeclaration } from '../lib/api'
+import { ApiError, clearParams, declareParam, type ParamDeclaration } from '../lib/api'
 import {
   CollapseToggle,
   handleSectionHeaderKeyDown,
@@ -48,6 +48,9 @@ export function Params({ params, onDeclared }: { params: ParamDeclaration[]; onD
   // in place by name, so changing it here would silently create a second param and orphan the
   // original (and anything referencing it by name) rather than renaming it.
   const [editingName, setEditingName] = useState<string | null>(null)
+  const [clearing, setClearing] = useState(false)
+  const [clearResult, setClearResult] = useState<string | null>(null)
+  const [clearError, setClearError] = useState<string | null>(null)
 
   const isBoolean = kind === 'boolean'
   const isElapsedSinceLast = source === 'elapsed_since_last'
@@ -117,6 +120,33 @@ export function Params({ params, onDeclared }: { params: ParamDeclaration[]; onD
     }
   }
 
+  // Clears every declared param (manual and auto-derived) in one action, then immediately
+  // re-derives whatever the engine can still find in retained log text (ticket 052) — a single
+  // confirmed click rather than removing params one at a time. `logs_considered` in the response
+  // is surfaced in the status line so it's clear the re-extraction only covers logs the engine
+  // still holds, not ones already evicted by a max-logs cap.
+  async function handleClearAll() {
+    if (params.length === 0) return
+    if (!window.confirm(`Clear all ${params.length} declared param(s)? Params will immediately be re-derived from log lines still held in memory; lines already evicted by a log cap can't regain their params.`)) {
+      return
+    }
+    setClearing(true)
+    setClearError(null)
+    setClearResult(null)
+    try {
+      const result = await clearParams()
+      setClearResult(
+        `Cleared ${result.removed}, re-derived ${result.reextracted} from ${result.logs_considered} retained log line(s).`,
+      )
+      resetForm()
+      onDeclared()
+    } catch (err) {
+      setClearError(err instanceof ApiError ? err.message : 'Failed to clear params')
+    } finally {
+      setClearing(false)
+    }
+  }
+
   return (
     <div className="border-b border-border text-sm">
       <div
@@ -262,7 +292,20 @@ export function Params({ params, onDeclared }: { params: ParamDeclaration[]; onD
         </form>
 
         <div className="min-w-0 flex-1">
-          <div className="mb-1 text-xs text-text-subtle">Declared params</div>
+          <div className="mb-1 flex items-center justify-between gap-2">
+            <span className="text-xs text-text-subtle">Declared params</span>
+            <button
+              type="button"
+              onClick={handleClearAll}
+              disabled={clearing || params.length === 0}
+              className="rounded border border-border-soft px-2 py-0.5 text-xs text-text-secondary hover:bg-surface-2 disabled:opacity-50"
+              title="Clear every declared param, then re-derive params from log lines still held in memory"
+            >
+              {clearing ? 'Clearing…' : 'Clear all'}
+            </button>
+          </div>
+          {clearResult && <div className="mb-1 text-xs text-text-subtle">{clearResult}</div>}
+          {clearError && <div className="mb-1 text-xs text-danger-text">{clearError}</div>}
           <div className="flex flex-wrap gap-1">
             {params.length === 0 && <span className="text-xs text-text-faint">No params declared yet.</span>}
             {params.map((p) => (

webapp/src/lib/api.ts

@@ -287,6 +287,21 @@ export function declareParam(request: ParamDeclaration): Promise<ParamDeclaratio
   return postJson('/api/params', request)
 }
 
+export interface ClearParamsResult {
+  /** How many param declarations (manual + auto-derived) were removed. */
+  removed: number
+  /** How many params were immediately re-derived from log text still retained by the engine. */
+  reextracted: number
+  /** How many retained log lines were re-scanned — lines already evicted by `max_logs` before the clear can't regain their params, so this can be smaller than the total lines ever ingested. */
+  logs_considered: number
+}
+
+// Clears every declared param (ticket 052) and re-derives whatever the engine's still-retained log
+// text supports — see `ClearParamsResult`'s fields for what came back.
+export function clearParams(): Promise<ClearParamsResult> {
+  return sendJson('/api/params', 'DELETE')
+}
+
 export function fetchMetricDeclarations(): Promise<MetricDeclaration[]> {
   return getJson('/api/metrics')
 }